I-Carbide spur, iimela ezigungxayo ze-14x14x2 kunye ne-18 × 18
• Imathiriyeli eluhlaza yi-tungsten carbide ene-ultra-fine grain.
• Ukomelela okuphezulu kunye nokumelana nokunxiba ukwenza ixesha lokuphila kwemela i-40% ngaphezulu
• Gaya ngemiphetho yokusika ebukhali ephezulu.
Kukho ubungakanani obahlukeneyo kunye neentlobo ezikhoyo
Imveliso ye-1 nganye iveliswa emva kwamanyathelo angaphezu kwe-13 okuqinisekisa ukuchaneka okuphezulu.
2.Umatshini: exhotyiswe entlokweni yokusika kwentloko
Amava angaphezulu kweminyaka eli-13 anamandla eR & D.
| U-L | UW | T | d |
| 14 | 14 | 2 | 8.4 |
| 18 | 18 | 1.95 | 10.3 |
| 18 | 18 | 2.45 | 10.3 |
| 18 | 18 | 2.95 | 10.3 |
| 18 | 18 | 3.7 | 10.3 |
Imilinganiselo eyahlukeneyo yokusebenza kweenkuni ze-carbide spurs kunye neemela ezihlabayo, iimela zokucwangcisa oomatshini beenkuni ngoku ziyafumaneka kwiintlobo ezahlukeneyo zezinto.
|
IBakala |
ISO |
Co% |
Ukuqina |
Amandla okugoba |
ukusebenza |
|
HCK01 |
I-K01 |
4.0 |
I-93.9HRA |
1720N / mm² |
Ubungakanani boqobo lwe-micron micron. Ukugqwesa kukuxhathisa ukunxiba. |
|
HCK10UF |
I-K05-K10 |
6.0 |
92.5HRA |
2060N / mm² |
|
|
HCK30UF |
I-K20 |
10.0 |
91.5HRA |
2520N / mm² |
|
Ukusetyenziswa kwebakala leCarbide spur, iimela ezigungxulayo |
|
|
HCK10UF |
Ingasetyenziswa kwiChipboard kunye neenkuni ezilukhuni kunye neplywood kwizinto zokusebenza. |
|
HCK30UF |
Eli nqanaba lilungele ibhodi ye-HDF kunye ne-MDF, ngakumbi ngokugqwesileyo ekusikeni i-chipboard kunye neenkuni ezilukhuni. |
Ukufakwa kwe-carbide kunye neemela zenziwe kumgangatho ophezulu we-carbide alloy. Inokuchaneka okuphezulu komhlaba kwaye inokubonelela ngobomi obude. Umgangatho uvunyiwe yimakethi yaseJamani, e-Itali naseMelika kuba asipheleli nje ekunikezeleni iimveliso kubathengi baseYurophu, kodwa sigcina nokutshintshiselana ngobuchwephesha kwexesha elide kunye nabathengi bethu kunye nokuphuhlisa iimveliso ezintsha ngokweemfuno zentengiso.
Ukuba ufuna ulwazi ngakumbi malunga nenkampani yethu, zive ukhululekile ukuqhagamshelana nathi ngoku.
