I-Carbide spur, imimese yokugaya i-woodworking-14x14x2 ne-18 × 18
• Okwenziwe eluhlaza yi-tungsten carbide yangempela okusanhlamvu oku-ultra-fine.
• Amandla aphakeme nokuqina kokugqoka ukwenza impilo yommese ibe ngu-40% ubude
• Gaya ngemiphetho yokusika ebukhali futhi ephezulu.
Kunamasayizi nezinhlobo ezahlukahlukene ezitholakalayo
Umkhiqizo we-1.Each ukhiqizwa ngemuva kwezinyathelo ezingaphezu kwezingu-13 zokuqinisekisa ukunemba okuphezulu.
2.For umshini: ifakwe Kuvunguza umsiki ikhanda
Isipiliyoni seminyaka engaphezu kwengu-13 esinamandla we-R & D.
| L | UW | T | d |
| 14 | 14 | 2 | 8.4 |
| 18 | 18 | 1.95 | 10.3 |
| 18 | 18 | 2.45 | 10.3 |
| 18 | 18 | 2.95 | 10.3 |
| 18 | 18 | 3.7 | 10.3 |
Ubukhulu obuhlukile bokhuni be-carbide spurs nemimese yokugaya, imimese yokuhlela imishini yezinkuni manje isiyatholakala ngezinhlobo zezinto ezibonakalayo.
|
Ibanga |
I-ISO |
Co% |
Ubulukhuni |
Amandla okugoba |
ukusebenza |
|
HCK01 |
I-K01 |
4.0 |
93.9HRA |
1720N / mm² |
Usayizi woqobo wokusanhlamvu we-Sub-micron. Kuhle kakhulu ekumelaneni kokugqoka. |
|
HCK10UF |
I-K05-K10 |
6.0 |
92.5HRA |
2060N / mm² |
|
|
HCK30UF |
I-K20 |
10.0 |
91.5HRA |
2520N / mm² |
|
Ukusetshenziswa kwebanga leCarbide spur, imimese yokugaya |
|
|
HCK10UF |
Ingasetshenziswa ku-Chipboard nokhuni oluqinile kanye neplywood ekwenzeni izinto. |
|
HCK30UF |
Leli banga lilungele ibhodi le-HDF ne-MDF, ikakhulukazi elihle kakhulu ekusikeni i-chipboard nezinkuni eziqinile eziqinile. |
Ukufakwa kwe-carbide nemimese kwenziwa nge-high quality virgin carbide alloy yokusetshenziswa kwe-Industrial. Inendawo yokunemba okuphezulu futhi inganikeza isikhathi eside sokuphila. Ikhwalithi ivunyelwe yimakethe yaseJalimane, e-Italy, naseMelika ngoba asigcini ngokunikeza ngemikhiqizo kumakhasimende aseYurophu, kepha futhi sigcina ukuhwebelana kwezobuchwepheshe besikhathi eside namakhasimende ethu futhi sithuthukisa imikhiqizo emisha ngokuya ngezidingo zemakethe.
Uma udinga imininingwane engaphezulu mayelana nenkampani yethu, zizwe ukhululekile ukuxhumana nathi manje.
